|Home||» Products||» Surface Grinder||» Surface Grinder|
We own a developed and large infrastructure that has enabled us to manufacture, supply and export Surface Grinder. These products are used in different metal industries for grinding and processing of ferrous & non-ferrous. Our clients appreciate these products owing to their effective functionality and user friendly operations. Known for their longer service life and low maintenance, these products have earned a high demand among our clients in the world market. Surface Grinder is available with us in different specifications as per the requirements of the clients.
The base is made of heavy duty, closed grain grey, cast iron amply proportionate give a rigid foundation. So essential for precision grinding. The base houses the electrical control, gear main driving system of the work slide & coolant arrangement.
The grinding head is supported by a box type column, which gives rigidity and minimum deflection at the wheel head. The special type motor is provided with tapper Roller Bearing.
The Segmental Grinding Wheel is of the "Outside Segment" type which in vertical Spindle Machines, has as distinct advantage in the setting & adjusting of the grinding segments. The segments are secured by bronze wedges on the outer periphery of the segmental wheel a complete set of segments can be replacement or rest in a few minutes. Protection for segmental Wheel is heavily organizes.
The longitudinal work side is well designed with on bearing surface as flat square type guide ways and other is V shaped to attain the maximum efficiency and accuracy.
The guide ways are lubricated with roller type internal reservoir system which needs minimum attention. The slides are fully protected with covers.The controls are so arranged that the operator can handle the machine from all the convenient angles of suit the type of jobs.
Note: As improvement design continually made this specification not be regarded s binding in detail and dimension, etc. are subject to alteration without notice.
It is most comprehensive for grinding engine block of Cars, Jeeps, Trucks, Tractors, Facing of Engine Heads & Pressure tight joints.
Precision Gears, Cams, Plates, Collers keys, Connecting levers, bearings coved & all other jobs where second size of any job is to be made parallel to the first size.
All type of wedge bar.
Dies Punches, Saw Cutters, Casers, Cutting Tools, Cutoff blades, from Tools Side Die blocks, Knives Die Section, Die Bases & Stipper Plates.
Crank Shaft Grinder
Vertical Fine Boring Machine
Vertical Honing Machine
Line Boring Machine (Horizontal)
Twin Head Machine
Cylinder Boring Machine (Portable)
|Principal Dimension Type ||Segmental No. 1 |
|Segmental Wheel ||Dia ||300 mm. or 750 mm. |
|Segmental Wheel||R.P.M. ||1440 |
|Table Working Max. ||Surface ||1220 x 290 |
|Table to Wheel ||Height Max. ||685 |
|Table ||Travel ||1100 |
|Grinding Capacity ||900 x 280 or 800 x 330 |
|Table Speed ||6", 8" x 12" min. |
|Vertical Micoleed Graduation ||01 mm. |
|Table with 2-T Slots to takes bolls ||13 mm. |
|Centre to (T) Bolts ||145 mm. |
|Floor Space required ||3635 x 1100 |
|Floor Height ||200 mm. |
|Approximate Gross Weight ||2700 kgs. |
|Approx Shipping Space Paced ||Cu. Ft. ||141 |
|Electric Equipments |
|Grinding Head Motor ||7.5 H.P. |
|Feeding for Main Slide ||1 1/2 H.P. |
|Coolant Pump ||0.1 H.P. |
|Rapid for Ram ||0.1 H.P. |
|Extra Equipments |
|Magnet Chuck ||755 x 250 |
|Head Motor HP Capacity ||12 1/2 x 15 H.P. |
|Double Speed Motor |